An AC remote that checks what happened

A flap photo verifies observed flap state, not cooling performance. Low-confidence results must remain unclear; do not automatically retry IR commands based on uncertain observations.

Quantities are for one build. Unless marked source-specified, they are planning quantities; confirm kit contents and the chosen configuration before ordering.

1. Qty. 1Plan / confirm
   Required

   Raspberry Pi 5, 4GB

   Infrared/vision bridge.

   Sources & quantity basis

   Creator source. Planning quantity for one build; check the selected configuration.

   • Source
   • Supporting source
   View product

   Exact Pi 5 4GB; US retailer

2. Qty. 1Plan / confirm
   Required

   128 GB microSD card

   Firmware, operating system or project storage.

   Sources & quantity basis

   Creator source. Planning quantity for one build; check the selected configuration.

   • Source
   • Supporting source

   No exact purchase link verified; confirm the model and requirements above before ordering.

3. Qty. 1Plan / confirm
   Required

   IR transmitter module

   Emit captured AC remote signals.

   Part, driver circuit and electrical ratings not identified.

   Sources & quantity basis

   Creator source. Planning quantity for one build; check the selected configuration.

   • Source
   • Supporting source

   No exact purchase link verified; confirm the model and requirements above before ordering.

4. Qty. 1Plan / confirm
   Required

   Logitech BRIO 100 USB webcam

   Observe AC flap position.

   Sources & quantity basis

   Creator source. Planning quantity for one build; check the selected configuration.

   • Source
   • Supporting source
   View product

   Exact product; UK store

5. Qty. 1Plan / confirm
   Required

   Existing air conditioner and its remote

   Controlled appliance and source signals.

   Exact AC and remote models not published.

   Sources & quantity basis

   Creator source. Planning quantity for one build; check the selected configuration.

   • Source
   • Supporting source

   No exact purchase link verified; confirm the model and requirements above before ordering.

6. Qty. 1Plan / confirm
   Conditional

   Infrared capture hardware

   Learn the original control signals.

   Only needed if no valid signal capture exists; creator does not identify the capture device.

   Sources & quantity basis

   Setup requirement — check against your configuration. Planning quantity for one build; check the selected configuration.

   • Source
   • Supporting source

   Use existing equipment or match the specification above. No exact purchase link verified.

7. Qty. To confirmPlan / confirm
   Required

   GPIO wiring and transmitter drive circuitry

   Connect the IR module safely.

   Do not drive a high-current IR emitter directly from Pi GPIO.

   Sources & quantity basis

   Setup requirement — check against your configuration. Planning quantity for one build; check the selected configuration.

   • Source
   • Supporting source

   Use existing equipment or match the specification above. No exact purchase link verified.

8. Qty. 1Plan / confirm
   Required

   Pi 5 power supply

   Power the device.

   Choose a Pi 5-rated supply and account for the camera and IR circuit.

   Sources & quantity basis

   Setup requirement — check against your configuration. Planning quantity for one build; check the selected configuration.

   • Source
   • Supporting source

   Use existing equipment or match the specification above. No exact purchase link verified.

9. Qty. 1 setPlan / confirm
   Required

   Stable camera / emitter positioning

   Keep observations and IR reliable.

   Sources & quantity basis

   Setup requirement — check against your configuration. Planning quantity for one build; check the selected configuration.

   • Source
   • Supporting source

   Use existing equipment or match the specification above. No exact purchase link verified.

10. Qty. 1Plan / confirm
    Tool

    Computer for setup

    Build, configure or flash the software.

    Sources & quantity basis

    Setup requirement — check against your configuration. Planning quantity for one build; check the selected configuration.

    • Source
    • Supporting source

    Use existing equipment or match the specification above. No exact purchase link verified.

Source reviewed, not assembled or hands-on tested. A working product page does not confirm stock, firmware compatibility or a complete build.