Robots & toys / Kit / assembly
A physical swipe-controlled number-merging game with game-state and rendering logic.
Read the original build See shopping list
A dedicated round touchscreen becomes a swipe-controlled handheld game.
Manufacturer explicitly presents it as one of four published CodeCraft-built projects, explaining gesture handling and game logic.
Board/display assembly, not a finished toy. Manufacturer showcase; compile success alone does not prove gameplay.
Manufacturer project showcase
Parts for one build. Reuse equipment you already own. Quantities are planning quantities unless the creator explicitly specifies a count; kit contents are not additional purchases.
Quantities are for one build. Unless marked source-specified, they are planning quantities; confirm kit contents and the chosen configuration before ordering.
Controller.
Creator source. Planning quantity for one build; check the selected configuration.
Exact product
Touch display and expansion board.
Creator source. Planning quantity for one build; check the selected configuration.
Exact product
Connect to the computer for programming or data.
A charge-only cable cannot flash firmware. Example requires a USB-A host port. If your computer has only USB-C, use an appropriate USB-C data cable instead. Reuse the device’s included cable where possible; this is not a standalone power-supply recommendation.
Setup requirement — check against your configuration. Planning quantity for one build; check the selected configuration.
Accessory example: USB-A to USB-C, 1 m, data capable
Build, configure or flash the software.
Setup requirement — check against your configuration. Planning quantity for one build; check the selected configuration.
Use existing equipment or match the specification above. No exact purchase link verified.
Mate XIAO to the display.
Check whether the ordered XIAO arrives with headers fitted; do not buy another controller assuming the display includes one.
Setup requirement — check against your configuration. Planning quantity for one build; check the selected configuration.
Use existing equipment or match the specification above. No exact purchase link verified.
Hold the assembled device.
No exact printable design or attachment hardware identified.
Creator source. Planning quantity for one build; check the selected configuration.
No exact purchase link verified; confirm the model and requirements above before ordering.
Portable operation.
Capacity, polarity and connector are not specified by the project; confirm before buying.
Setup requirement — check against your configuration. Planning quantity for one build; check the selected configuration.
Use existing equipment or match the specification above. No exact purchase link verified.
Source reviewed, not assembled or hands-on tested. A working product page does not confirm stock, firmware compatibility or a complete build.
Waveshare ESP32-S3 Touch AMOLED 1.75C
A pendant with a Tamagotchi-like pet, conversation history, voice replies, watch face and phone-camera remote shutter.
Grove Beginner Kit for Arduino + Mini Fan
One knob coordinates animated petals on an OLED with a real fan and LED.
Unitree Go2 quadruped robot
Custom laptop video controller, sensor access and software that locates a beach ball, approaches it and moves it; a natural-language controller was also demonstrated.
Share your hardware project so others can try it.
